Monoprice Maker Select V2 3D Printer Review

The ANET i3, HictopPrusa, Sunhokey i3, TronXY i3 or whatever you want to call them are my winners for the most worth it 3D printers under $300.

You can not only get it from under $200 with free shipping. You can get it right from the Amazon for only $230 on prime!

Monoprice Maker Select V2 3D Printer Review

It is almost the same as Maker Select Mini but the i3 look likes are just so much efficient than the Monoprice printer.

Besides this ANET A8, Monoprice Maker Select V2 3D Printer Review, You can see the wide range of Best 3D Printers for beginners $300  to pick your desired one.

Talking further about its features and specifications, it has 8*8 inches (or 200mm) build plate, also have a fully heated bed, and a complete point sourced so it is nearly infinitely upgradable.

Maximum printing temperature is shown fixed as 260°C in the specification but it can be changed with an all-metal hot end reform.

Like other printers, it almost uses SD to print or direct connection to the computer.

Here I want to tell you that what thing I love the most in this printer is that it is as good as the assembler. You should be knowledgeable enough to use it because i3 clones come with a kit and you should have some know-how too.

READ MORE: XYZPrinting Da Vinci 1.0 3D Printer Review

But this matter is not to worry about because it offers its customers to learn its ins and outs of their machine.

These flat-packs are so popular that you should not have a problem in finding its tutorials on building them if you get stuck.

But in the state of i3 clones are the likes of the Wanhao Duplicator 3 and Monoprice Maker Select V2. Both of which drift around the $300 price range.

The best thing about these printers is that these are almost completely assembled and work requirement is very minimum to get up and running.

In all i3 style printers, there are some changes or modifications are made by a community of people and passed them that what more expensive machines or printers can do out of the box.

In competition with i3 kits, the semi-assembled Wanhao and Maker select V2 offers great value to people who do not want to spend the time assembling and could be worth extra $100.

They have full 8*8 inches (200mm), heated build plates capable of hitting 110°C.

Monoprice Maker Select V2 3D Printer Review

This allows printing of common materials like PLA, ABS, PETG, and Nylon.


  •  Point source/ open source
  •  Large community
  •  Larger build area
  •  Fully capable heated bed
  •  Sub$200 Kits


  • Knowledge required to build kits

Conclusion:I think it is the best option because it becomes flat packed in a reasonable price. Outputs are great with easy prints and easy to use also. The only thing you need to know about this printer is some knowledge which is stated or instructed on user manual. So, are you people ready to take an advantage of this 3D printer.

Have a Nice Day!

  • Leave a Comment